We are actively looking for Distributors and Dealers, more favorable prices, and discounts. If interested, contact us soon

MjoInir II - The First Fractional Fibroblast Plasma Device in the World

Leaflife Mjolnir Series is the first fractional fibroblast plasma equipment, which is the best solution to replace all the fractional beauty technologies as innovative design for a perfect face and body rejuvenation. Fractional fibroblast plasma pen device uses the needle-shaped plasma column to release micro-electrical discharge or ARC to treat a fraction of the skin surface at a time, which reduces downtime.
  • Technology Innovation of Fibroblast Plasma Pen;
  • 100% Replacement of Fractional Laser and RF;
  • Trusted by Clinics & Salons All over the World;
  • Free Marketing & Training Help & Top ROI;
  • Best Solution to Rejuvenation & Tightening Loose Face, Eye, Neck Skin, etc. without Surgery.
Contact Us

Working Principle

Under the controllable way, the needle-shaped plasma column is released to the skin surface by the fractional way and dot by dot. The principle is to ionize gas in the air to create more small electrical arches, tissues are treated “sublimate” and avoid spreading unwanted heat to the sur­rounding areas. The heat widens and is subsequently transferred into the epidermis all the way to the papillary layer which contains fibroblast cells. The result is contraction and tightening of the skin cells, leads to the skin remodeling and improvement in various signs of aging and scar etc.

Equipment Characters

A Three spark modes

Non-invasive treatment by blue color tip, whose needles don’t touch skin, the plasma arc can be seen in the tip. By low energy setting, energy is mainly released radially along epidermis’ spinous and basal layers. Oily skin and acne skin with inflammation can be improved a lot, skin resurfacing application is well done.

The purple color tip’s needles just contact skin, the short plasma arc penetrate deeply into skin and happen local glow. Invasive treatment way by high energy level 6 to 10, different skin situation can choose exact energy level for wrinkles, eyes and scar. The epidermis is completely broken down, and the energy is mainly released axially along the breakdown path, reaching the dermal papilla layer and reticular layer.

Traditional single needle tip focus to accurate treatment for face’ s small area, especially eyelid lifting

B Safe and accurate fractional scan
High power design but more energy level choice, high energy of plasma column. Adaptive high-frequency excitation source, the plasma column’s energy is stable, convenient to adjust, and good directivity.
Small dot size and even dots distribution, low risk of skin side effect. Comfortable treatment feeling, no need anesthesia, high safety and no downtime.

 

C More scan mode

Dot, line, and fractional array are optional, meet target shapes precisely.

D Fast and efficient

Dot-by-dot scanning operation, short treatment time, good consistency to dots, ensure the excellent effect.

E High integration and smart design. High reliability and stable performance.

F Low investment and but extremely high return.

 

Technical Advantages

Compared to Fractional RF, whose energy just reach epidermis, so can’t treat wrinkles and scar problem in dermis. Needles don’t contact skin to operate, not be influenced by skin resistance.
Compared to Fractional laser, Mjolnir’s investment cost is much more economical, but can cover all the application of laser. Safety risk to operator and patient both are much lower, and can be used more widely, no any medical limits.
Compared with normal plasma, whose current excitation is performed at a lower frequency, and the plasma column has poor directivity and low power. Single plasma’s treatment needs much longer time, the energy is difficult to control, un-even treatment depth, and dots’ consistency is poor, so more dangerous and bigger damage risk to skin.

Compared with Micro-needle RF, which is purely invasive treatment way, Mjolni  is much less dangerous and has much lower consumable cost.

Conclusion: Fractional plasma is best solution to replace all the fractional beauty technologies as innovative design!

 

Application

Improve skin texture and tone: rough skin, large pores, greasy skin, acne skin with inflammation, dark yellow skin, un-even pigment, skin resurfacing, help adsorb cosmetics.
Eye treatment: eyelid and eye bags
Wrinkles: striae gravidarum, stretch mark, striae atrophicae, aging wrinkle
Anti-aging: aged skin, flabby and flagging skin, no elasticity
Scars: acne scar, surgical scar, proliferative scar, burn scar, traumatic scar

Parameters

Output power 10w(AVG), 150W(peak)
Energy 10~400mJ/Dot
Pulse width
0.1~4ms/dot
Spark mode
ARG,Glow; Single needle
Scan mode
Dot; Line; Array
Dots number
1, 3, 5, 9, 13, 21, 25
Size
320*300*185 mm
Net weight
7.8KG

FAQ

Leaflife Fractional Plasma Device - MjoInir Series is upgraded from Plasma Pen.
For normal plasma pen,it`s current excitation is performed at a lower frequency, and the plasma column has poor directivity and low power. Single plasma's treatment needs much longer time, the handle and energy are difficult to control, un-even treatment depth. and dots' consistency is poor, so more dangerous and bigger damage risk to skin.
While fractional plasma can make up above defects,the energy is higher, dots and energy are distributed more evenly to make sure better treatment effect. 1-25 dots on the screen can be chosen to meet target place accurately, much easier and faster operation.
Of course it can be used in beauty salons. Plasma is not a laser. It is not a medical technology and has low risk. It does not require an operator to require a doctor's license, so ordinary beauticians can also operate it after full training and knowledge.
Improve skin texture and tone, eyelid treatment, wrinkles, anti-aging, scars
Anesthetic cream should be applied if doing the high energy level treatment. Need take care of skin after operation.
The machine is easy to operate, all users could follow up the manual; Any further operating inquiries, photos, and videos support could be conducted.
Our company has ISO13485 system certificate, and then this equipment has CE certificate. Medical certificate is in application period.
Of course, we can provide training certificates issued by our company to customers who purchased machine.
3-5 times / course of treatment, the treatment times depend on the different situation. (For details, please refer to operation manual)
We support OEM/ODM, but that depends on order quantity. You can talk to sales for details. Usually don’t support this service to one set order.

We are actively looking for Distributors and Dealers, more favorable prices, and discounts. If interested, contact us soon